SEE MY new site at http://www.camtronics-cnc.com

 

We take credit cards via www.paypal.com on all items. Use my dmauch@seanet.com as the recipient and place your order in the comments field

or send checks/money order/bank drafts to

Camtronics Inc
18230 130th PL NE
Bothell, WA 98011-3118

NEW! The new G540 case is here.

g540show002a.jpg (187771 bytes)g540show.jpg (66274 bytes)g540show 003a.jpg (92673 bytes)

I have designed a new case to house the new and awesome G540 from Geckodrives. The case is 11.75"W X 7.5"D X 5"H. The case is cnc machined to fit the G540. The case is steel with aluminun front and rear panels. ( The protective covering wasn;t removed in the above middle photo) I added cutouts for a fan to keep the G540 and the power supply cool. A slot is provided under the G540 for easy attachment of wires/cables for home/limit switch, relays and a VFD.  The front panel is set up with a lighted power switch and a Engage/ Disengage switch to shut down the output to the stepper motors. The inside of the case is large enough for any additions the user may want to add. The position of the relays is easily moved. The case can be purchased  as a bare case  that is machined  or you can add the additions listed below. This case makes assembly easy and great looking.

Machined case only (no electircal fittings but I can provide a list of material.) G540CaseOnly $89.99 plu s/h

Machine case with the fan,fan grill, power entry, lighted power switch and engage/disengage switch. G540casebasicelectric  $115 plus s/h

Machined case with all of the above and a G540 with all wire provided with assembly instructions and a 24V 11A power supply  $499 plus s/h

See my stepper motors below . Let me know what you want to do and I'll help you select the correct motor.

 

G320/G340  CASE . Servo amp 3 axis/4 axis cases are now available for $110. The case is made up of flat panels that are machine to match the G320/G340 . The case is machined for all required connectors, switches, amps and transformers used in construction of a awesome servo system. Send email for a picture.

finfrnt.jpg (64729 bytes)finbcka.jpg (72966 bytes)

Email me for pricing of assembled and tested units

Servo kit pricing. Items may be bought separately

G320.G340 case $110

4  module Heatsink $35

Db25 with screw terminals $30

Connector kit $30

3 G320 servo amps X$129=$387

power supply 36V 25A $125 ( email me at dmauch@seanet.com I do not want to sell power supply kits to unqualified people.

3 encoder cables $36

3 motor cables 306

Figure $38 s/h in USA for complete kit

 

Power Supply ( email me at dmauch@seanet.com I do not want to sell power supply kits to unqualified people.

110 primary 33VDC at 20A ideal for the 600 oz in Ametch motors and others.

G320 servo Amps $129 each

G320 SPECIFICATIONS:

Power Supply 18 to 80 VDC

Motor Current 0 to 20 Amps

Lock Range +/- 128 count following error

Feedback Quadrature TTL Encoder

Feedback Resolution X4 Encoder Line Count

Switching Frequency 25 kHz

Current Limit 0 to 20 Amp, Trimpot Adjustable

Analog PID Damping and Gain Trimpots

Step Pulse Frequency 0 to 250 kHz

Step Pulse "0" Time 0.5 Microseconds Min.

Step Pulse "1" Time 3.5 Microseconds Min.

Size 2.5" X 2.5" X 0.825"

Weight 3.6 oz weight

Encoder Supply +5VDC, 50 mA max

G340 servo Amp $149 each  

G340 SPECIFICATIONS:

Power Supply 18 to 80 VDC

Motor Current 0 to 20 Amps

Lock Range +/- 128 count following error

Feedback Quadrature TTL Encoder

Feedback Resolution X4 Encoder Line Count

Switching Frequency 25 kHz

Current Limit 0 to 20 Amp, Trimpot Adjustable

Analog PID Damping and Gain Trimpots

Step Pulse Frequency 0 to 250 kHz

Step Pulse "0" Time 0.5 Microseconds Min.

Step Pulse "1" Time 3.5 Microseconds Min.

Multiplier Settings X1, X2, X4, X5 and X10

Size 2.5" X 2.5" X 0.825"

Weight 3.6 oz weight

Encoder Supply +5VDC, 50 mA max

 

DB25 junction board breakout box. This new board uses SCREW Terminals for pins 1 to 19. Each pin has a pull up resistor if required. A separate header is provided for those applications requiring +5. This should make connections to the 5A drivers and similar drivers easy. The db25 breakout box is pre wired with pins 1 to 19 running to screw terminals. Pins 20-25 are connected together and are used for ground terminals ( 5 provided). All screw terminals are marked on the board.Makes connections to Desknc for DOS, Desknc for windows, Maxnc, CNCPRO, Dancam and EMC easy.

Kit is $30 plus $5 s/h $9 overseas

 

Send Check or money order to cover the merchandise and shipping to:
Camtronics Inc
18230 130th PL NE
Bothell, WA 98011-3118

 

G210/G201A  CASE . Step motor drives 3 axis/4 axis cases are now available for $100. The case is made up of flat panels that are machine to match the G201A/G210 . The case is machined for all required connectors, switches, amps and transformers used in construction of a awesome stepper system. $100 plus $6 s/h

fullfront.jpg (77330 bytes) rearful.jpg (77481 bytes)

Email me for assembled and tested units.

Stepper kit pricing. Items may be bought separately.

G201/.G210 case $110

Db25 with screw terminals $30

4 module heatsink $25

Connector kit $30

3 G201 stepper drivers X$129=387 or

3 G203 stepper driver X $149=$447

3 G210  stepper drivers X $149=447

3 640 oz in peak stepper motors $130=390

power supply 33V 20A $125

(Power Supply ( email me at dmauch@seanet.com I do not want to sell power supply kits to unqualified people.)

3 motor cables 30

Figure $38 s/h in USA for the complete kit

 

G201A  (silky smooth)micostepper 7A chopper step motor driver (Assembled)

VERY Small size (2.5" x 2.5" x 0.85")

1 to 7 Amp motor phase currents

3.5 oz weight

24 to 80 VDC power supply voltage

Ultra smooth 10-microstep circuit

Mid-band stabilization

High speed: up to 200,000 microsteps per second

Low heating: only 18 Watts at 7 Amps

Low standby current: 15 mA

Opto-isolated step and direction inputs

Disable input freewheels the motor

Made in the USA

Price $129 + $5 s/h

 

G203 A  (silky smooth)micostepper 7A chopper step motor driver (Assembled)

Virtually burnout proof

Run off low voltage parallel port signals

VERY Small size (2.5" x 2.5" x 0.85")

1 to 7 Amp motor phase currents

3.5 oz weight

24 to 80 VDC power supply voltage

Ultra smooth 10-microstep circuit

Mid-band stabilization

High speed: up to 200,000 microsteps per second

Low heating: only 18 Watts at 7 Amps

Low standby current: 15 mA

Opto-isolated step and direction inputs

Disable input freewheels the motor

Made in the USA

Price $149 + $5 s/h

 

G210  micostepper with rate multiplier   (assembled)    

Supply Voltage: 24 to 80 VDC

Phase Current: 1 to 7 Amps

Size: 2.5"W, 2.5"D, .85"H (63.5mm, 63.5mm, 21.5mm)

Mounting Pattern: 4 6-32 screws, 1.75" by 2.375" (44.5 mm, 60 mm)

Quiescent Current: 15 Ma or less

Weight: 3.6 oz. (100 gm)

Step Frequency: 0 to 200 kHz

Step Pulse "0" Time: 0.5 uS min (Step on falling edge)

Temp: 0 to 70 C

Step Pulse "1" Time: 4 uS min

Humidity: 0 to 95 % (non-condensing)

Direction Setup: 1 uS min (20 uS min hold time after Step edge)

Power Dissipation: 1 to 18 W (1 to 7 Amps)

Price $149 + $5 s/h

 

Servo kit pricing

G320.G340 case $110

Db25 with screw terminals $30

Connector kit $30

4 module heatsink $25

3 G320 servo amps X$129=387

3 600 oz in peak servo motors with 250 CPR encoders $169=507

power supply 36V 25A $125

3 encoder cables $30

3 motor cables 30

Figure $38 s/h in USA

 

 

SINK ELECTRICAL DISCHARGE MACHINING.

Plans for this beatifully done Computer Controlled   SEDM machine are now available. The plans are the best I have seen to date. Camtronics is delighted to be the distributor of these plans.  The manual contains 80 pages of drawings, pictures, theory, and instructions on building a Computer Controlled   S-EDM. Check out the pictures in the image section of this web page.                                                                                        

The plans are easily worth the $35plus $5 s/h in the USA or buy this with the Wire EDM plans for only $70 plus $6 s/h

CNC Wire EDM ( electrical discharge Machining) Plans and software are available. The plans is a booklet about 110 pages in a nice bound book form. It comes complete with complete instructions for building an awesome CNC controlled wire edm . Wire EDM is PWM. Beautiful pictures, detailed parts and assembly plans  sources as well as software to operate your cnc WEDM.  See pictures and a video clip at    http://www.ktmarketing.com/CNC.html     Plans $50 plus $5 s/h or if you buy the WEDM plans with the S-EDM plan both for only $70 plus $6 s/h

SERVO MOTORS

 

Stepper Motors

NEW Stepper Motors. Awesome performance

August 20,2008

 

The MCG stepper motors have been discontinued because they have changed their requirements and want a 100 piece minimum order. Therefore I have switched manufacturers and now offer the H34280-4A which is a 640 oz in which  a 4 wire motor. I can provide this motors as a 4 wire ofr 8 wire motor. It is a nema 34 with a .499"D shaft and run great. I used these on one of my control units that I build for an OEM.   “

NEMA23

PART #        TORQUE         CURRENT SERIES  PARALLEL      PRICE                         SHAFTING

23H2100BM      495 OZ IN                                     3A             $69     PLUS $6S/H     dual     1/4"   

23H2100B     495 OZ IN                                         3A             $69     PLUS $6S/H     dual     3/8"

23H286-20-8B 425  OZ IN                         1.4A        2.8A          $69     PLUS $6S/H     dual     1/4"

23H276-30-8B 282 OZ IN                          2.1A        4.2A          $59     PLUS $6S/H     dual     1/4"

23H256-21-8B 185 OZ IN                          1.5A        3A             $59      PLUS $6S/H     dual     1/4"

23H251-24--8B 156 OZ IN                          1.7A        3.4A          $49     PLUS $6S/H     dual     1/4"

NEMA 34

PART #        TORQUE         CURRENT SERIES  PARALLEL      PRICE                         SHAFTING

34H2160-62-8B  1810  OZ IN                 4.4            8.8A             $225     PLUS $12 S/H     dual     1/2"

34H2120-42-8B  1160  OZ IN                    3               6A             $169      PLUS $12 S/H     dual     1/2"

34H2160-60-4B  1200  OZ IN                                    6A             $179     PLUS $12 S/H     dual     1/2"

34H2295-43-8B 906 OZ IN                     3.05            6.1A            $149     PLUS $12 S/H     dual     1/2"

34H280-45-4A  640 OZ IN                                       4.5              $120       PLUS $12 S/H     SINGLE  1/2"

34H260-42-8B 400 OZ IN                         3A            6A               $99        PLUS $10 S/H     dual     1/2"

34H260-60-8B 465OZ IN                                         6A               $99         PLUS $10 S/H     dual     1/2"

 

 

 

 

 

Servo Motors New Not surplus

400 oz in peak NEMA23 Frame PMDC servo motor with encoder. Your choice of either a 250 CPR (1000 PPR quad or 500 CPR (2000 ppr quad) servo motors MCG ID23005  Data sheet availble on request. Ideal for mill drills, 3/1 cnc ready machines, small lathes to 9" swing, CNC routers and plasma cutters similar to the K2   $200 each plus $8 ea s/h

id23005.jpg (135079 bytes)

 

id33004 .jpg (706861 bytes)

1100 oz  peak 90V nema34 servo motor MCG ID33004  Your choice of either a 250 CPR (1000 PPR quad or 500 CPR (2000 ppr quad) servo motors.Data sheet availble on request. Ideal for small mills and larger mills when used with a2/1 ratio timing pulleys. Cnc ready machines, lathes to 14" swing, CNC routers  $269 each plus $12 ea s/h

 

id33003.jpg (718383 bytes)

ID33004 800 oz in peak PMDC servo motor with encoder. Your choice of a 250 cpr or 500 cpr encoder. These are ideal for the larger mill drills and smaller knee mills.

Data sheets available on request. $249 plus s/h

Software :

.

 and MACH3

Mach3 Specifications: 

  • 45000hz Pulse Stream
  • 6 Axis
  • Windows XP or Win2000
  • One or Two printer ports
  • G-Code Display
  • 3d ToolPath
  • Tool Offset
  • Fixtures
  • RS274 NIST G-Code
  • Muliple Outputs
  • Multiple Inputs
  • Subroutines
  • Macros
  • VB Scripting
  • OCX Control for external programming
  • Digitizing Point Cloud Creation
  • JPG/BMP, DXF, HPGL Imports
  • JoyStick Control
  • Torch Height Control
  • Screen Designer for Custom Layouts
  • 3 Encoder inputs.
  • Lathe Module in development
  • Spindle Speed Input
  • Spindle Speed Output
  • FeedRate OverRide
  •   $159 plus s/h

OPTIMIZER Reads excellon drill files, optimizes the tool path, sets the up and down and converts them to toolpaths. Two versions provided. One to work with programs that require G code and the other for use with Dancam. $25 plus $4 s/h

Send E-mail to dmauch@seanet.com at Camtronics Inc. to order yours today!